Brightline Thermoplast Private Limited

Brightline Thermoplast Private Limited

Seetarampet, Hyderabad, Telangana
GST No. 36AAICB4877F1ZF
TrustSEAL Verified
Call 0794255258783% Response Rate
SEND EMAIL
 

Services

Manufacturing Process

PHYSICAL PROPERTIRS
Colour White Yellow
Luminance greater than 82 Greter than 50
Drying Time 3 min at 32° C 3 min at 32° C
Skid Resistance Greater than 55 Greter than 55
Cracking Resistance Nil Nil
Softening point 99° C - 105° C 101° C - 106° C
Flow Resistance Less than 15% Less than 15%
Yellowness Index ( White ) 0.05 -
PACKING

Bag Size : 25 kgs.

SHELF LIFE

12 months form the date of manufacture.

TEST CERTIFICATE

Manufacturers test certificate shall be forwarded for compliance of the material to the specification required.

The Thermoplastic material shall be homogeneously composed of aggregates, pigment, resin and glass beads. The material shall be free form all skins, dirt and foreign objects and shall comply with requirements indicated in the fable below.

PROPERTY OF CONSTITUENTS OF MARKING MATERIAL

(Percentage by weight)

Constituents White Yellow
Binder 18.0 min 18.0 min
Glass Beads 30 - 40 30 - 40
Titanium Dioxide 10.0 min Nill
Calcium Carbonate & Insert fillers 42.0 max See Nill
BINDER

Shall compromise of plasticized synthetic hydrocarbon resin, plasticized natural resin or rosin.

PIGMENT

White pigment shall either consist of Titanium Di-oxide Type A ( Anatase ) or Type R ( Rutile ). Yellow pigment shall consist of Lead Chromate and shall not exceed 5% by mass of material.

AGGREGATES

Light colored silica sand, calcite, quartz or calcinated flint.

REFLECTORIZATION
Solid Glass Beads to be incorporated in the material prior to application to the road surface shall comply with Class A requirements of BS 6088. Solid Glass Beads for additional surface reflectorization shall comply with Class B - BS Drop On requirement of BS 6088.
PHYSICAL PROPERTIES OF MAKING MATERIAL

Luminance

White: Daylinght luminance at 45 degrees - 65% min as per AASHTO M249.

Yellow: Daylight luminance at 45 degrees - 45% min as per AASHTO M249.

DRYING TIME

When: applied at a temperature specified by the manufacturer and to the required thickness, the moterial shall set to bear traffic is not more than 15 minutes.

SKID RESISTANCE

Not less than 45 as per BS 3262.

CRACKING RESISTANCE AT L0W TEMPERATURE

The material shall show no cracks on application to concrete blocks.

SOFTENING POINT

102.5 ± 9.5° C as per ASTM D 36.

FLOW RESISTANCE

Not more than 25% as per AASHTO M 249.

For more Information:Contact Us

Clients / Customers

A high quality Thermoplastic Road Marking material conforming to MOST 803.4.2.2 – India & AASHTO M249. It consists of aggregates, pigment and extender bound together with a Hydrocarbon resin plasticized with mineral oil and made refractorised using 30 – 40% pre-mix glass beads complying with Class A requirement of BS 6088. BRIGHTLINE THERMOPLAST White & Yellow are easy to melt and apply on all asphalt and concrete surfaces using screed, extrusion and spray machines to form a highly durable marking with excellent adhesion, colour fastness, skid resistance and light reflectively.
For more Information:Contact Us

Events & Participation

Event
For more Information:Contact Us
Events & Participation
X
zoomup




Reach Us
Pavan Kumar Goyal (Director)
Brightline Thermoplast Private Limited
Office No. 14-1-129/1/A, Aghapura
Seetarampet, Hyderabad - 500012, Telangana, India


Call Us


Send E-mail